We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for COMPACTPCI backboard.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

COMPACTPCI backboard - List of Manufacturers, Suppliers, Companies and Products

COMPACTPCI backboard Product List

1～9 item / All 9 items

Displayed results
CompactPCI-3U Backplane SPB-xxCR3

CompactPCI-3U Backplane SPB-xxCR3

CompactPCI-3U backplane (PICMG2.0 R3.0 compliant type)

<Specifications> ◆Board Material: Epoxy Glass (Halogen-free boards are also available) (FR-4, 3.2t, 10-layer board) ◆Connector: IEC1076 (2mm Hard Metric) ◆Power Supply Method: Screw terminal (18A per terminal) +5V, +3.3V, +12V, GND ◆Check Terminals: PRST, DEG, FAL, +5V, GND ◆Others: M66EN can be supported depending on the presence or absence of 0Ω resistors <Features> ◆Complies with PICMG2.0R3.0 standards. ◆Mechanically compatible with our PICMG2.0R2.1 standard backplane due to common external dimensions. ◆The CLK line is wired 1-to-1 from the system slot to each peripheral slot. ◆Signal line impedance is set to 65Ω ±10%. ◆In the 8-slot type, a long-type connector is installed in the slot farthest from the system slot, allowing for the installation of an off-board terminator (optional). ◆If used in conjunction with a bus module bridge, please contact our sales department.

  • Embedded Board Computers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CompactPCI-6U Backplane SPB-xxCWx

CompactPCI-6U Backplane SPB-xxCWx

CompactPCI-6U backplane (PICMG2.0 R2.1 compliant type)

<Specifications> ◆Board Material: Epoxy Glass (FR-4, 3.2t, 10-layer board) ◆Connector: IEC1076 (2mm Hard Metric) ◆Power Supply Method: Screw terminal (18A per terminal); +5V, +3.3V, +12V, -12V, GND ◆Check Terminals: PRST, DEG, FAL, +5V, GND ◆Others: M66EN can be supported by pattern cutting <Features> ◆Complies with PICMG2.0R2.1 standards. ◆Hot swap compatible. (PICMG2.1R1.0) ◆The characteristic impedance of the signal lines is set to 65Ω±10%. ◆System slots are available on both the left and right sides. ◆In the 8-slot type, a long-type connector is implemented in the slot farthest from the system slot, allowing for the installation of an off-board terminator (optional). ◆P3-P4-P5 can be used for user I/O and rear I/O module implementation. ◆Power supply terminals can be expanded with options. (Using Faston terminals) ◆VIO power switching bus bar is standard equipped. (Set to +5V at shipment) ◆Optionally, "Type AB" shroud can be implemented.

  • Embedded Board Computers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CompactPCI-6U Backplane SPB-xxCWER

CompactPCI-6U Backplane SPB-xxCWER

CompactPCI 6U backplane (compatible with PICMG 2.0 R2.1, bridge-supported type)

<Specifications> ◆Board Material: Epoxy Glass (FR-4, 3.2t, 10-layer board) ◆Connector: IEC1076 (2mm Hard Metric) ◆Power Supply Method: Screw terminal (18A per terminal); +5V, +3.3V, +12V, -12V, GND ◆Check Terminals: PRST, DEG, FAL, GND, IPMB-SCL, PMB-SDA, IPMB-PWR <Features> ◆Does not sacrifice peripheral slots when using a bridge. ◆Interrupt signals and board addresses can be set arbitrarily. ◆Hot swap compatible. (R2.0) ◆M66EN can be supported with a resistor. (Factory setting is 33MHz) ◆Slot expansion can be freely configured in combination.

  • Embedded Board Computers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CompactPCI-6U Backplane SPB-05CWR3

CompactPCI-6U Backplane SPB-05CWR3

CompactPCI 6U Backplane (PICMG 2.0 R3.0 Compliant Type)

<Specifications> ◆Board Material: Epoxy Glass (FR-4, 3.2t, 10-layer board) ◆Connector: IEC1076 (2mm Hard Metric) ◆Power Supply Method: Screw terminal, ATX power connector ◆Check Terminals: PRST, DEG, FAL ◆Others: M66EN Switching <Features> ◆Compliant with PICMG2.0R3.0, PICMG2.1R1.0 (Hot Swap), and PICMG2.10R1.0 (Keying) standards. ◆Signal line characteristic impedance set to 65Ω ±10%. ◆Switchable between 33/66MHz. (Set to 66MHz at shipment) ◆GA〔0:4〕 can be set by the user. (Set according to specifications at shipment) ◆Standard equipped with "Type AB" shroud for rear transition module. (RP3, RP5) Also, standard equipped with coding key (brown) for all slots. (RP4) ◆Standard equipped with V (I/O) power switching bus bar. (Set to +3.3V at shipment) Also, standard equipped with coding key (yellow) for all slots. (P1) ◆FG-SG connection can be switched using backplane fixing screws.

  • Embedded Board Computers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CompactPCI-3U Backplane SPB-xxCx

CompactPCI-3U Backplane SPB-xxCx

CompactPCI-3U backplane (PICMG2.0 R2.1 compliant type)

<Specifications> ◆Board Material: Epoxy Glass (FR-4, 3.2t, 10-layer board) ◆Connector: IEC1076 (2mm Hard Metric) ◆Power Supply Method: Screw Terminal (18A per terminal) +5V, +3.3V, +12V, GND ◆Check Terminals: PRST, DEG, FAL, +5V, GND ◆Others: M66EN can be supported by pattern cutting <Features> ◆Complies with PICMG2.0R2.1 standards. ◆The characteristic impedance of the signal lines is set to 65Ω ±10%. ◆System slots are available on both the left and right sides. ◆In the 8-slot type, a long-type connector is implemented in the slot farthest from the system slot, allowing for the installation of the off-board terminator STB-64C (optional). (Please inquire) ◆If used in conjunction with the bus module bridge, please contact our sales department.

  • Embedded Board Computers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CompactPCI-3U Backplane SPB-xxCER

CompactPCI-3U Backplane SPB-xxCER

CompactPCI-3U backplane (compliant with PICMG2.0 R2.1 and bridge-compatible type)

<Specifications> ◆Board Material: Epoxy Glass (FR-4, 3.2t, 10-layer board) ◆Connector: IEC1076 (2mm Hard Metric) ◆Power Supply Method: Screw Terminal (18A per terminal) 　　　　　　+5V, +3.3V, +12V, -12V, GND ◆Check Terminals: PRST, DEG, FAL, GND, IPMB-SCL, PMB-SDA, IPMB-PWR <Features> ◆Complies with PICMG2.0R2.1 standards. ◆Does not sacrifice peripheral slots when using a bridge. ◆Interrupt signals and board addresses can be set arbitrarily. ◆Hot swap compatible. (PICMG2.1) ◆M66EN can be supported with resistors. (Set to 33MHz at shipment) ◆Compatible with Bus Bridge Module PICMG2.6.

  • Embedded Board Computers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CompactPCI-3U Backplane SPB-08PXI

CompactPCI-3U Backplane SPB-08PXI

CompactPCI-3U backplane (PXI bus compatible type)

<Specifications> ◆Board Material: Epoxy Glass (FR-4, 3.2t, 12-layer board) ◆Connector: IEC1076 (2mm Hard Metric) ◆Power Supply Method: Screw Terminal (18A per terminal) 　1. Screw Terminal (18A per terminal), +5V, +3.3V, +12V, -12V, GND 　2. ATX Power Connector (optional support) 　3. 15-pin DIN Connector (optional support) <Features> ◆Compliant with PICMG2.8 (PXI Bus) standards. ◆Signal line characteristic impedance set to 65Ω ±10%. ◆System slot is 1 slot (left side), trigger slot is located at the 2nd slot. ◆V (I/O) voltage can be switched via bus bar. ◆Standard equipped with electrical specifications defined by the PXI bus, including 10MHz reference clock, PXI local bus, and PXI start trigger bus.

  • Other process controls
  • Embedded Board Computers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CompactPCI-6U Backplane SPB-xxCTR

CompactPCI-6U Backplane SPB-xxCTR

CompactPCI-6U backplane (computer telephony compliant, hot-swappable type)

<Specifications> ◆Board Material: Epoxy Glass (FR-4, 3.2t, 12 layers) ◆Connector: IEC1076 (2mm Hard Metric) ◆Power Supply Method: Screw Terminal (18A per terminal) +5V, +3.3V, V (I/O), +12V, -12V, GND, FG Telecom Power (-Vbat/-SELVbat) Telecom Ringing Voltage (VRG) ◆Check Terminals: PRST, DEG, FAL ◆Signal Line Impedance: 65Ω (±10%) <Features> ◆System slot is arranged on the light side (right system) ◆System slots P3/P4/P5 can accommodate rear I/O modules (IEEE1101.11) ◆Peripheral slot P3 can be used as user I/O ◆V (I/O) power switching bus bar is standard equipped (default is +5V) ◆+5V and CT coding key are standard equipped ◆Signal line termination is standard equipped (for 8-slot products) ◆Various jumper post arrangements for settings ◆Optional additional power supply terminals can be installed (Faston terminals) ◆GND - Earth (FG) connection is possible ◆Optional implementation of "Type AB" shroud is available

  • Communications

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CompactPCI-6U Backplane SPB-08PSR

CompactPCI-6U Backplane SPB-08PSR

CompactPCI-6U backplane (compatible with PICMG2.16 R1.0 type)

**Packet Switching Backplane** <Specifications> ◆ Board Material: Epoxy Glass (FR-4, 3.2t, 10-layer board) ◆ Connector: IEC1076 (2mm Hard Metric) ◆ Power Supply Method: Screw Terminal, ATX Power Connector ◆ Check Terminals: PRST, DEG, FAL, IPMB <Features> ◆ Complies with PICMG2.16R1.0, PICMG2.0R3.0, and PICMG2.1R2.0 (Hot Swap) standards. ◆ Compatible connectors for PICMG2.9R1.0 (SMBus) available (optional). ◆ Supports 2 Fabric Slots (Slot Numbers 1, 2) Supports 6 Node Slots. ◆ System Slot (Slot Number 8) can be used as a Node Slot. ◆ RP3 and RP5 come standard with Type AB Shroud. ◆ V (I/O) voltage can be switched between 5V and 3.3V. ◆ Custom development and manufacturing available, including types that support high-frequency characteristics (low dielectric constant).

  • Embedded Board Computers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of COMPACTPCI backboard

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.